Our factory’s Tent lights with the feature of no spot, no dark area and waterproof. Outdoor rainy days do not affect. Its color temperature is warm white light and positive white. COB Tent lights /camping light has good flexibility and you can bend it at will. It uses USB switch/port can be connecte......

We just need to prepare a pair of scissors and a lamp belt to be cut. You need to observe the surface of the light strip. Each light strip has a small scissors on it, which means that you can cut it along the scissors straight line, without cutting the circuit on the FPC board and causing short circ......

COB stands for Chips on Board, which means that chips are directly packaged on PCB. COB lamp strip is a lamp strip that encapsulates the chip on a flexible board. Most chips are flip-chips, which are linearly fixed on PCB, and then a layer of packaging glue mixed with fluorescent powder is directly ......

The flexibility and other characteristics of the silicone tape are more conducive to the product design. In addition, it can be LED strip's flexible cutting size and connection characteristics, which is more popular in the market.

When cutting, pay attention to finding the "scissors" mark per meter, and you can only cut it when it is marked. Wrong or partial cutting will cause one meter to be unlit! Some of them miss the mark. It's best to look at the mark carefully before cutting, and cut it according to the unconnected plac......

Before leaving the factory, some manufacturers' led strip was unqualified. The amount of solder in the lamp belt is small, and the solder joints are easy to fall off. If the quality of lamp solder is not good, the solder joints of led strip are prone to brittle cracking and falling off during bendin......